5 Steps to Change Cartridges in Canon PIXMA Mg5220 Printer

The Canon PIXMA Mg5220 is an Inkjet all-in-one machines that can be used for various purposes, such as printing, scanning and faxing. Changing the ink cartridge needs little efforts. Ensure to use the right replacement cartridges for your printer, installing the wrong type can stop it from functioning or cause it to fail. You should also use the caution to restrict ink dripping or spilling on you. It’s also suggested to contact Canon printer support number for the proper replacement. Also, you can follow the below-listed steps to change the cartridge appropriately.

1.          Reveal the front paper tray of your printer. Raise the upper part of your print until it goes high as it will reach and close the tab. The cartridge carriage will shift to the middle of the printer.

2.          Press in the back tab on your ink cartridge and raise it. Extract the new cartridge from the packaging, unwrap the plastic chip that keeps the toner feed aperture.

3.          Push the ink cartridge into the slot in the container and press down on end next to you to lock the brace in place.

4.          Pick up the printer upper part and push the bottom of the tab away from you to expose it and then lower the cap. Your printer will then move through different cycles to readjust the cartridges and check the new one is placed correctly.

5.          If you have more than one cartridge dried out simultaneously, follow the steps 2-4 for all ink cartridges before pulling down the lid.

Though changing the ink cartridge on your Canon PIXMA Mg5220 Printer isn’t a complicated process, it still requires doing correctly to avoid damaging the printer.  However, if you face any difficulties in replacing the cartridges, it’s suggested to call on the Canon printer customer support phone number and talk to the experts regarding your queries and concerns and get the resolved instantly.