5 Steps to Change Cartridges in Canon PIXMA Mg5220 Printer

The Canon PIXMA Mg5220 is an Inkjet all-in-one machines that can be used for various purposes, such as printing, scanning and faxing. Changing the ink cartridge needs little efforts. Ensure to use the right replacement cartridges for your printer, installing the wrong type can stop it from functioning or cause it to fail. You should also use the caution to restrict ink dripping or spilling on you. It’s also suggested to contact Canon printer support number for the proper replacement. Also, you can follow the below-listed steps to change the cartridge appropriately.

1.          Reveal the front paper tray of your printer. Raise the upper part of your print until it goes high as it will reach and close the tab. The cartridge carriage will shift to the middle of the printer.

2.          Press in the back tab on your ink cartridge and raise it. Extract the new cartridge from the packaging, unwrap the plastic chip that keeps the toner feed aperture.

3.          Push the ink cartridge into the slot in the container and press down on end next to you to lock the brace in place.

4.          Pick up the printer upper part and push the bottom of the tab away from you to expose it and then lower the cap. Your printer will then move through different cycles to readjust the cartridges and check the new one is placed correctly.

5.          If you have more than one cartridge dried out simultaneously, follow the steps 2-4 for all ink cartridges before pulling down the lid.

Though changing the ink cartridge on your Canon PIXMA Mg5220 Printer isn’t a complicated process, it still requires doing correctly to avoid damaging the printer.  However, if you face any difficulties in replacing the cartridges, it’s suggested to call on the Canon printer customer support phone number and talk to the experts regarding your queries and concerns and get the resolved instantly.

3 Ways to Install Canon PIXMA MP130 Inkjet Printer Drivers on Vista

If you face any problems when installing the Canon PIXMA MP 130 all-in-one printer and are getting any error message on your Windows Vista PC, then you must check that you’re installing the new and compatible version of the printer driver. Before availing the Canon printer customerservices number, there are three ways you can try to install the printer software in a proper manner and without getting any trouble.

Method #1: Install PIXMA Driver Using CD

Before using this approach, you need to make sure that the system is compatible with CD/DVD drive. You must have an installation disc and USB cable to connect the printer. Here’s how to do:

1.          Turn on your printer in which you want to install the drivers. If you’re prompted to connect USB to the PC, then connect it, otherwise, don’t try to do that

2.          Put the CD into your system and run the setup file. It initiates to launch the instruction wizard, and then continue with the steps to finish it.

3.          Connect your PIXMA printer to the PC using a USB cable. Wait until it recognizes the printer and moves ahead to the next once all goes fine.

4.          Add the values for every step and finish the installation. You can now print from Canon PIXMA printer as it has installed. 

Method #2: Install PIXMA driver manually via the ‘Add a printer’ option

The below instructions will let you know how to download the setup file of the Canon MP130 driver. Check these steps:-

1.          Turn on the PC and then connect your PIXMA printer to the Vista computer. Once it’s connected and finishes the startup process, turn on your printer.

2.          Click the ‘Start’ menu and choose the ‘Settings,’ and then the ‘Printer and Faxes,’ followed by the ‘Add a Printer’ option.

3.          Once the installation wizard starts up, choose the ‘Next’ option and allow your system to recognize the plug-and-play printer.

4.          Now your PIXMA printer is ready to use as the driver is installed successfully. 

Method #3: Install Canon Printer driver with downloaded setup file

1.       Go to the Canon’s official site. Choose the ‘Drivers and Downloads,’ and then the ‘Driver Finder.’ Input the model number in the search box and click the ‘Search’ option.

2.       Locate your printer in the list and click the ‘Download Driver’ option. Select the Windows Vista from the drop-down list and your browser will redirect to the download page automatically.

3.       Click the ‘Download Now’ button and choose to save the file. Wait until the download process completes. Now, open the downloaded file and go through the installation steps and answer the instructions.

4.       While the process has completed, you will be informed that it ends. Also, take a test print to make sure that your PIXMA printer is printing correctly. 

These instructions helped you to install Canon PIXMA printer driver and make your printer work correctly. However, if you’re still getting problems in installing the Canon PIXMA MP130 all-in-one Inkjet printer drivers on your Windows Vista PC, you can ask the solution just by calling on the Canon technical support number and set up your printer properly.

Source: http://bit.ly/2owHwaQ

3 Handy Step to Change Default Settings of Epson Smart Panel

The Epson Smart Panel program has included all Epson scanners and multi-functional copiers. This utility program includes all features, such as scanning to email and scanning for optical character recognition, which help you assemble and communicate data. If you don’t want one or some of the default configuration in the Epson Smart Panel, you can change the necessary settings without any hassle. Before making a call on the Epson printer customer service number, check these steps for changing the appropriate settings.

1.         Click the Windows orb of the system connected to the printer, followed by the “All Programs” menu. Access the ‘Epson Smart Panel’ folder and click on it to open the program.

2.            Click on the function you require changing the default configuration for and then click on the ‘More Settings’ option. You should check the box labeled as ‘Black & White’ at times regarding the ‘Scan to OCR’ function.

3.            Configure the service settings as necessary and click the ‘OK’ button to go to the main page. Repeat as required for any other functions in the Epson Smart Panel, you need changing the default configuration for.

If you’re troubled by any of the printed issues or unable to modify the settings, you should instantly call on the Epson support number and talk to the active agents in regard to solve out all problems and errors within a short span of time.